Unblocking a toilet is something that no one wants to do, but this can happen to anyone unlucky enough. So, you have to be ready and know how to unblock a toilet when the time comes. Unfortunately, this can be a stressful task if you don’t know how to do the job properly. However, you don’t have to worry because the following 3 easy steps to unblock your toilet will help you when you really have to do this task.
Use a toilet cleaner product
The first easy step to unblock your toilet is to use a toilet cleaner product such as the one from HG. Since blocked toilets are a very common case, you won’t find difficulties in finding a toilet cleaner product. Usually, you can find such products in a home improvement store or any convenience store near your home, and there are also several online shops selling such products. When you get your hands on the toilet cleaner product, you only need to use it on your blocked toilet by following the manufacturer’s guide. This usually involved pouring the toilet cleaner product into the toilet and flushing it to remove the blockage, especially if the blockage is not too deep yet.
Use a toilet cleaning tool
So, how to unblock a toilet? The second easy step is to use a toilet cleaning tool. The most basic tool you can use to unblock a toilet is a toilet plunger. This tool can be a good solution if the blockage is quite deep and can’t be removed with a toilet cleaner product. To use this tool, you only need to cover the toilet drain with the rubber part of a toilet plunger. The toilet plunger will then make a tight seal around the toilet drain, allowing you to dislodge whatever causes the blockage when you move the plunger handle up and down.
Use hot water and dish soap
Finally, the last easy step to unblock your toilet is to use hot water and dish soap. You can try this step if the step where you use a toilet plunger fails to get the job done. To perform this step, you only need to pour a sufficient amount of dish soap into the toilet drain and then flush it with hot water. Dish soap is able to lubricate the blockage, allowing the water to push it through the pipes more easily. However, you may have to let the dish soap mixture sit for around 10 minutes until you have to flush it again with hot water.